Single-Phase Bi-Directional Power/Energy IC

The CS5463 enables digital power meter manufacturers to provide highly accurate, cost-effective solutions for advanced power measurements. This IC is an integrated power-measurement device that combines two Delta Sigma A/D converters, high-speed power calculation functions and a serial interface on a single chip. Additional features include AC and DC calibration, extended phase compensation and three configurable energy output pins. Designed for residential single-phase or industrial three-phase power meter applications, the IC accurately measures instantaneous current and voltage while calculating instantaneous power, IRMS and VRMS, real power, apparent power, reactive power, fundamental power, harmonic power, power factor and line frequency. The CS5463 is easy to design in as a pin-compatible upgrade to the popular Cirrus Logic’s popular CS5460A and CS5461A. It retains all the functionality of its predecessors, while also providing additional calculations and functionality. For communication with a microcontroller, the IC features a bi-directional serial interface, which is initialized and fully functional upon reset. The CS5463 can interface to a low-cost shunt resistor or transformer for current measurement and to a resistive divider or potential transformer for voltage measurement. The CS5463 delivers accurate power usage measurements and is ideal for electronic power meter applications.

Technology

Energy Measurement

Features

  • Energy data linearity: +0.1% of reading over 1000:1 dynamic range
  • On-chip Functions:
    • Instantaneous voltage, current and power, IRMS and VRMS, average real/apparent/reactive power, fundamental power, harmonic power, energy-to-pulse conversion, power factor, line frequency
  • Meets accuracy spec for IEC, ANSI, JIS
  • Low-power consumption
  • Adjustable input range on current channel
  • GND-referenced signals with single supply
  • On-chip temperature sensor
  • On-chip 2.5 V reference (typ 25 ppm/°C)
  • AC/DC system calibrations
  • Phase compensation
  • Simple 3-wire digital serial interface
  • Power-supply monitor
  • Programmable energy-to-pulse output function
  • Configurable pulse outputs for real/apparent/reactive power
  • Power supply configurations:
    • VA+ = +5 V; AGND = 0 V;
    • VD+ = +3.3 V to +5 V
  • Package: 24-pin SSOP; lead-free assembly

Parametric Specifications

ADC Converters 2
Current Sensor Options Shunt;
CT
Active Energy Accuracy 0.1% over 1000:1 dynamic range
Reactive Energy Accuracy 0.2% over 1000:1 dynamic range
SNR (dB) 78
Digital Outputs Energy Pulses
Analog Power Supply (V) 5
Supply Current (µA) 3.3-5
Power Consumption (mW) 21
Package 24 SSOP

Technical Documents

CS5463 Product Data Sheet

May 9, 2011, DS678F3 : 374 Kb

Technical Bulletin: CS5463 Rev D

Dec 5, 2008, DS678TB4 : 52 Kb

CS5463 Product Bulletin

May 27, 2005, 0155-0505-PB-LP : 107 Kb

More

Comprehensive Solutions