Product News

SA12

High Switching Frequency PWM Amplifier


Output Current MAX (A)Supply Voltage MAX (V)Switching Frequency (kHz)Power Dissipation MAX (W)Int. Power MAX (W)
15 200 200 250 185
Hide

Related Documents

Hide

Design Resources


Hide

Charts and Diagrams






The SA12 is a pulse width modulation amplifier that can supply 3000W to the load. An internal 400kHz oscillator requires no external components. The clock input stage divides the oscillator frequency by two, which provides the 200 kHz switching frequency. External oscillators may also be used to lower the switching frequency or to synchronize multiple amplifiers. Current sensing is provided for each half of the H-bridge giving amplitude and direction data. A shutdown input turns off all four drivers of the H-bridge output. A high side current limit and the programmable low side current limit protect the amplifier from shorts to supply or ground in addition to load shorts. The H-bridge output MOSFETs are protected from thermal overloads by directly sensing the temperature of the die. The 12-pin hermetic MO-127 power package occupies only 3 square inches of board space.

Applications:

  • Reactive Loads
  • Low Frequency Sonar
  • Large Piezo Elements
  • Off-Line Drivers
  • C-D Weld Controller

  • High Frequency Switching - 200 kHz
  • Wide Supply Range: 16-200V
  • 15A Continuous to 65°C case
  • 3 Protection Circuits
  • Analog or Digital Inputs
  • Synchronized or External Oscillator
  • Flexible Frequency Control

SA12

High Switching Frequency PWM Amplifier

Overview

Output Current MAX (A)Supply Voltage MAX (V)Switching Frequency (kHz)Power Dissipation MAX (W)Int. Power MAX (W)
15 200 200 250 185

Description

The SA12 is a pulse width modulation amplifier that can supply 3000W to the load. An internal 400kHz oscillator requires no external components. The clock input stage divides the oscillator frequency by two, which provides the 200 kHz switching frequency. External oscillators may also be used to lower the switching frequency or to synchronize multiple amplifiers. Current sensing is provided for each half of the H-bridge giving amplitude and direction data. A shutdown input turns off all four drivers of the H-bridge output. A high side current limit and the programmable low side current limit protect the amplifier from shorts to supply or ground in addition to load shorts. The H-bridge output MOSFETs are protected from thermal overloads by directly sensing the temperature of the die. The 12-pin hermetic MO-127 power package occupies only 3 square inches of board space.

Applications:

Features

Diagram

SA12 Product Diagram

Related Documents

Design Resources


Charts and Diagrams





 

Product News