Product News

SA03

30A, 100V PWM Amplifier


Output Current MAX (A)Supply Voltage MAX (V)Switching Frequency (kHz)Power Dissipation MAX (W)Int. Power MAX (W)
30 100 22.5 300 250
Hide

Related Documents

Hide

Design Resources


Hide

Charts and Diagrams






The SA03 is a pulse width amplifier that can supply 3000W to the load. An internal 45kHz oscillator requires no external components. The clock input stage divides the oscillator frequency by two, which provides the basic switching of 22.5 kHz. External oscillators may also be used to lower the switching frequency or to synchronize multiple amplifiers. Current sensing is provided for each half of the bridge giving amplitude and direction data. A shutdown input turns off all four drivers of the H bridge output. A high side current limit and the programmable low side current limit protect the amplifier from shorts to supply or ground in addition to load shorts. The H bridge output MOSFETs are protected from thermal overloads by directly sensing the temperature of the die. The 12-pin hermetic MO-127 power package occupies only 3 square inches of board space.

Applications:

  • Motors to 4HP
  • Reactive Loads
  • Low Frequency Sonar
  • Off-Line Drivers
  • C-D Weld Controller

  • Wide Supply Range: 16-100V
  • 30A Continuous to 60°C case
  • 3 Protection Circuits
  • Analog or Digital Inputs
  • Synchronized or External Oscillator
  • Flexible Frequency Control

SA03

30A, 100V PWM Amplifier

Overview

Output Current MAX (A)Supply Voltage MAX (V)Switching Frequency (kHz)Power Dissipation MAX (W)Int. Power MAX (W)
30 100 22.5 300 250

Description

The SA03 is a pulse width amplifier that can supply 3000W to the load. An internal 45kHz oscillator requires no external components. The clock input stage divides the oscillator frequency by two, which provides the basic switching of 22.5 kHz. External oscillators may also be used to lower the switching frequency or to synchronize multiple amplifiers. Current sensing is provided for each half of the bridge giving amplitude and direction data. A shutdown input turns off all four drivers of the H bridge output. A high side current limit and the programmable low side current limit protect the amplifier from shorts to supply or ground in addition to load shorts. The H bridge output MOSFETs are protected from thermal overloads by directly sensing the temperature of the die. The 12-pin hermetic MO-127 power package occupies only 3 square inches of board space.

Applications:

Features

Diagram

SA03 Product Diagram

Related Documents

Design Resources


Charts and Diagrams





 

Product News