CS61574A/75

T1/E1 Line Interface Unit


Power Supply (V)Control ModesLine CodersNumber of ChannelsTBR-12 CompliantImpedance Matching Line DriverPackage
5 Host, H/W & Extended H/W AMI, B8ZS & HDB3 1 28 PDIP
28 PLCC
Hide

Related Documents


The CS61574A and CS61575 combine the complete analog transmit-and-receive line interface for T1 or E1 applications in a low-power, 28-pin device operating from a 5 V supply. Both devices support processor-based or standalone operation and interface with industry-standard T1 and E1 framers.

The receiver uses a digital DLL (delay-locked loop), which is continuously calibrated from a crystal reference to provide excellent stability and jitter tolerance. The CS61574A has a receiver jitter attenuator optimized for minimum delay in switching and transmission applications, while the CS61575 attenuator is optimized for CPE (customer premise equipment) applications subject to AT&T 62411 requirements. The transmitter features internal pulse shaping and a matched, constant impedance output stage to ensure signal quality on mismatched, poorly terminated lines.


  • Provides analog transmission line interface for T1/E1 applications
  • Provides line driver, jitter attenuator and clock-recovery functions
  • Fully compliant with AT&T 62411 Stratum® 4 jitter requirements
  • B8ZS/HDB3/AMI encoder/decoder
  • 14 dB of transmitter return loss
  • Low-power consumption (typically 175 mW)
  • Package: 28-pin PLCC; lead-free assembly

CS61574A/75

T1/E1 Line Interface Unit

Overview

Power Supply (V)Control ModesLine CodersNumber of ChannelsTBR-12 CompliantImpedance Matching Line DriverPackage
5 Host, H/W & Extended H/W AMI, B8ZS & HDB3 1 28 PDIP
28 PLCC

Description

The CS61574A and CS61575 combine the complete analog transmit-and-receive line interface for T1 or E1 applications in a low-power, 28-pin device operating from a 5 V supply. Both devices support processor-based or standalone operation and interface with industry-standard T1 and E1 framers.

The receiver uses a digital DLL (delay-locked loop), which is continuously calibrated from a crystal reference to provide excellent stability and jitter tolerance. The CS61574A has a receiver jitter attenuator optimized for minimum delay in switching and transmission applications, while the CS61575 attenuator is optimized for CPE (customer premise equipment) applications subject to AT&T 62411 requirements. The transmitter features internal pulse shaping and a matched, constant impedance output stage to ensure signal quality on mismatched, poorly terminated lines.

Features

Diagram

CS61574A/75 Product Diagram

Related Documents

Design Resources