Design Resources

CS4207 HD Audio CODEC

Introducing the new CS4207 HD Audio CODEC.
For a quick review, please view our Product Brief.
Review the Product Features List.
To request the full datasheet, please log in or register below.


Enlarged View

The CS4207 is a highly integrated multi-channel low-power HD Audio CODEC featuring 192kHz DACs, 96kHz ADCs, 192 kHz S/PDIF Transmitters and Receiver, Microphone pre-amp and bias voltage, and a ground-centered Headphone driver. Based on multi-bit, delta-sigma modulation, it allows infinite sample rate adjustment between 32 kHz and 192 kHz.

The ADC input path allows control of a number of features. The microphone input path includes a selectable programmable gain pre-amplifier stage and a low-noise MIC bias voltage supply. A PGA is available for line and microphone inputs and provides analog gain with soft ramp and zero cross transitions.

The ADC also features an additional digital volume attenuator with soft ramp transitions. The stereo headphone amplifier is powered from a separate internally generated positive supply, with an integrated charge pump providing a negative supply. This allows a ground-centered analog output with a wide signal swing and eliminates external DC-blocking capacitors.

The integrated digital audio interface receiver and transmitters utilize a 24-bit, high-performance, monolithic CMOS stereo asynchronous sample rate converter to clock align the PCM samples to/from the S/PDIF interfaces. Auto detection of non-PCM encoded data disables the sample rate conversion to preserve bit accuracy of the data.

In addition to its many features, the CS4207 operates from a low-voltage analog and digital core, making this part ideal for portable systems that require low power consumption in a minimal amount of space.

The CS4207 is available in a 48-pin WQFN package in both Automotive (-40°C to +105°C) and Commercial (-40°C to +85°C) grades. The CS4207 Customer Demonstration Board is also available for device evaluation and implementation suggestions.

Resolution (bits) Dynamic Range (dB) THD+N (dB) Sample Rate (kHz) Analog Outputs Power Supply (V) Type Package
24 105 ADC;
101 HP;
110 Lineout		 -88 ADC;
-89 HP;
-94 Lineout		 192 DAC /
96 ADC		 Single-ended or Differential VD = 1.5 V to 1.8
VA = 3.3 V to 5.0V
V_HP = 3.3V to 5.0V
V_HD = 1.5 V to 3.3V
VL = 3.3 V		 Multi-Channel 48-QFN
  • DIGITAL to ANALOG FEATURES
  • DAC1 (Headphone/Line Out)
    • 101 dB Dynamic Range (A-wtd),
    • -88 dB THD+N
  • Headphone Amplifier - GND Centered
    • Integrated Negative Voltage Regulator
    • No DC-Blocking Capacitor Required
    • 44 mW Power/Channel into 16 Ϫ
  • DAC2 & DAC3 (Line Outs)
    • 110 dB Dynamic Range (A-wtd),
    • -94 dB THD+N
    • Differential Balanced or Single-Ended
  • Each DAC Supports 32 kHz to 192 kHz Sample Rates Independently.
  • Digital Volume Control
    • +6.0 dB to -57.5 dB in 0.5 dB Steps
    • Zero Cross and/or Soft Ramp Transitions
  • Independent Support of D0 and D3 Power States for Each DAC
  • Fast D3 to D0 Transition
    • Audio Playback in Less Than 50 ms
       
  • ANALOG to DIGITAL FEATURES
  • ADC1 & ADC2
    • 105 dB Dynamic Range (A-wtd),
    • -89 dB THD+N
    • Differential Balanced or Single-Ended Inputs
    • Analog Programmable Gain Amplifier (PGA) +/-12dB, 1.0dB Steps, with Zero Cross Transitions and Mute
  • MIC Inputs
    • Pre Amplifier with Selectable 0 dB, +10 dB, +20 dB, and +30 dB gain settings
    • Programmable, Low Noise MIC Bias Level
  • Each ADC Supports 8 kHz to 96 kHz Sample Rates Independently
  • Additional Digital Attenuation Control
    • -13.0 dB to -51.0 dB in 1.0 dB steps
    • Zero Cross and/or Soft Ramp Transitions
  • Digital Interface for Two Dual Digital Mic Inputs
  • Independent Support of D0 and D3 Power States for Each ADC
  • Digital Audio Interface Receiver
  • Complete EIAJ CP1201, IEC-60958, S/PDIF Compatible Receiver
  • 32 kHz to 192 kHz Sample Rate Range
  • Automatic Detection of Compressed Audio Streams
  • Integrated Sample Rate Converter
    • 128 dB Dynamic Range
    • -120 dB THD+N
    • Supports Sample Rates up to 192 kHz
    • 1:1 Input/Output Sample Rate Ratios
       
  • Digital Audio Interface Transmitter
  • Complete EIAJ CP1201, IEC-60958, S/PDIF Compatible Transmitter
  • 32 kHz to 192 kHz Sample Rate Range
     
  • System Features
  • Very Low D3 Power Dissipation of <7mW
    • Jack Detect Active in D3
    • HDA Bus BITCLK not required for D3 State
  • Jack Detect Does not Require HDA Bus BITCLK
  • All Configuration Settings are Preserved in D3 State
  • Pop/Click Suppression in State Transitions
  • Detects Wake Event and Generates Power State Change Request when HDA Bus Controller is in D3
  • Variable Power Supplies
    • 1.5 V to 1.8 V Digital Core Voltage
    • 3.3 V to 5.0 V Analog Core Voltage
    • 3.3 V to 5.0 V Headphone Drivers
    • 1.5 V to 3.3 V HD Bus Interface Logic
    • 3.3 V Interface Logic levels for GPIO, S/PDIF and Digital Mic.
  • Individual Power-Down Managed
    • ADCs, DACs, PGAs, Headphone Driver, S/PDIF Receiver and Transmitter

To request the full CS4207 Product Datasheet, please log in or register below then click on the "Next" button.

Thank you for your interest in Cirrus Logic. To complete your request, please register your contact information with us if you have not already done so.

  I am a new user. I need to register.
  I am a registered user. I need to log in.

Forgot your password?